Formwork comes in three main types:
Traditional timber formwork. The formwork is built on site out of timber. It is easy to produce but time consuming for larger structures, and it has quite a limited lifespan.Engineered Formwork systems. The formwork is built out of prefabricated modules with a steel frame and
Foundation steel frame formwork
Stay-In-Place Formwork systems. The formwork is assembled on site, usually out of prefabricated Insulating Concrete Forms. The formwork stays in place after the concrete has cured to provide thermal and acoustic insulation, space to run utilities, and backing for finishes.
Stay-In-Place Structural Formwork systems. The formwork is assembled on site, usually out of prefabricated fibre-reinforced plastic forms. These are in the shape of hollow tubes, and are usually used for columns and piers. The formwork stays in place after the concrete has cured and acts as axial and shear reinforcement, as well as serving to confine the concrete and prevent against environmental effects, such as corrosion and freeze-thaw cycles.
For the first two types, once the concrete has been poured into formwork and has set (or cured), the formwork is struck or stripped (removed) to expose the finished concrete. The removal time of the forms is dependent upon the strength needed to be achieved by the cured concrete. Spectacular accidents have occurred when the forms have been either removed too soon or under-designed to carry the load imposed by the weight of the uncured concrete.
This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article Formwork

Search
Categories
Print Article
Send to a friend
Save as PDF